DIY Plastics UK
by Protech Direct



UPVC DIY Patio Doors Specification


MADE TO MEASURE DIY FRENCH DOORS PVCu
Specification
---------------------------------------------------------------------------------------------------

- Made to measure

- Outer frame - Synseal Shield 70mm uPVC



- Open in or out (Please Specify)

- Internal Bead

- Wide sash 5-point locking system including dead bolt as standad

- Lever/Lever handles in white as standard (Silver Gold and Black available at extra cost)

- Midrail 115mm Deep

- Restrictors available to specification

- Reinforcement on:
* White PVCu complete door, outer frame side jambs only
* Woodgrain PVCu fully
* Weather bar fitted as standard

- Double Glazed with Toughened Safety Glass as standard

- White Lever / Lever handles to master leaf only (Silver, Gold and Black at extra cost)

- Finger shoot bolts (top and bttom) to slave leaf as standard

- Handles to slave available at extra cost

- Lever / Pad Handles

- Low threshold - aluminium / rubber

- 150mm Cill as standard



- Our windows are mnufactured from profile supplied by Synseal Extrusion Ltd, which are Kitemarked to BS EN 12608 (Licence no. KM30983) and BS7950/BS EN12608 (Licence no. KM41324)

- Synseal Shield profiles have been assured by the BBA, Assessment report no. 1672 and no. 2519.

- All Shield window and door profiles are extruded from 100% virgin compound and are not diluted with second or more generation of reground extrusion profile.


- The minimum size for a fire escape window is an unobstructed openable area that is at least 0.33m² (minimum dimensions: 750mm high and 450mm wide or 450mm high and 750mm wide). The bottom of the openable area should not be more than 1100m from the fall. See Building Regulations Approved Document B.



Main Technical Details

---------------------------------------------------------------------------------------------------

- Material: Acrylic modified high quality imapact resistant, white unplasticised Polyvinyl Chloride extrusion to produce a rigid multi-chamber extrusion.

- Physical Properties: Comply with BS EN 12608 2003

- Colours: Mahogany, White, Cherrywood and Light Oak.




- Appearance: Smooth, White Nn-porous gloss surface/Woodgrain.

- Surface Finish: Stabilised against UV light to prevent excessive colour shift. Meets requirements of BS EN 12608 when used in the EU Moderate climate



- Thermal Conductivity at 20° C: Typical test value 0.16 W/M deg C. PVCu has a low thermal conductivity and virtually constant over a wide constant range.


Schematics

---------------------------------------------------------------------------------------------


 

Sliding Mirror Wardrobe Doors

 

DIY Plastics UK , a member of The BB Group of Companies


E&OE

These web pages and the information and images within them are copyright of The B.B. Group of Companies

 

Our recommended home improvement websites are listed below:

 

Click here to return to the top of the page

Send us your DIY Plastics enquiry click here



For terms and conditions, click here

Patio Doors