DIY Plastics UK
by Protech Direct

Easy Fit Products > Glazing Bar Systems > 600 Aluminium Glazing Bar System

600 Structural Glazing Bar System

For use with triplewall and quadwall roofing Polycarbonate Sheet
in Pitched Roof glazing Applications

For installing multiwall polycarbonate plastic roof sheeting in 16mm, 20mm and 25mm thicknesses.

Aluminium Base Bar with 280G gasket fitted. Spans up to 3.5m unsupported.
PVCu underclad tray for base bar.
PVCu 'snap down' top cap.
Screw-on polycarbonate Stop End Plate Ref P600EPW for a neat finish.
Aluminium Side Trim Ref P601/2 available for 16mm and 25mm sheet thicknesses.
Anti-Dust Tape Ref 4844. Use at eaves (gutter) ends of multiwall sheet to prevent dust entry, whilst allowing drainage.
Aluminium 'U' Profile Ref 253/5. Covers and protects anti-dust tape whilst giving a rigid and neat finish to the cut sheet edge.
Installation of an eaves filler helps prevent draughts. Aluminium Eaves Filler Ref P285F complete with flexible gasket Ref 280HG.
Stainless steel self-tapping screws.
Plastic cover cap washers.
Butyl flashing, Ref 200/10, ensures a weatherproof seal.
Sealing Tape Ref 4810. Permanently closes top ends of the multiwall sheet. Should be used in conjunction with 4844 anti-dust tape.

There is a Easy Fit glazing bar or panel system suitable for most pitched roof glazing applications. These include commercial and industrial rooflights, school walkways and covers, hospital corridors, station canopies, supermarket entrances, conservatories and lean-to sunrooms. In addition, there is a cross-section of fixing accessories and complementary items to give a totally professional finish to your glazing. Whilst these systems are designed primarily for the easy installation of multiwall polycarbonate sheet glazing, many of them will also accommodate glass.

When installing multiwall sheet, we advise that you refer to the manufacturer's literature in relation to: the ratio between sheet thickness and width; the distances for glazing bar centres; sheet expansion allowances. To avoid stress in the glazing sheet, you should not overtighten the screw-on bars and accessories.

We also recommend the use of screws and bolts, as other metals may fail through natural chemical reaction with aluminium. Such screws are available in the Easy Fit range. They come complete with matching coloured snap-on plastic caps.

All aluminium bars and extrusions are manufactured to BS1474: 1987 and BS6063. All coloured bars are polyester powder-coated for a maintenance-free long life.



THESE PRICES ARE CURRENTLY UNDER REVIEW

3 metres

Less 50%

4 metres

Less 50%

6 metres

Less 50%

600 Glazing Bar (in white only) N/A N/A
       

(All Prices are plus VAT)

3 metres

Less 50%

4 metres

Less 50%

6 metres

Less 50%

222 F Profile - 10mm Twinwall

223 F Profile - 16mm Triplewall

F Profile for 25mm Fivewall Polycarbonate    

(All Prices are plus VAT)

Screw and Cap Set

each

244/245 Fixing Buttons

each

4844 Breather Tape

    per 33 metres

       

(All Prices are plus VAT)

2.1 metres

Less 50%

3 metres

234/235 Polycarbonate U Profile

N/A

252 Aluminium U Profile

N/A

N/A

253 Aluminium U Profile

N/A

N/A

Aluminium U Profile for 25mm Fivewall Polycarbonate

N/A

N/A

All Prices are plus VAT

The prices in green text are the prices you pay

25 Delivery Charge for all orders (UK Mainland), please enquire for offshore and highlands

On all orders there is a delivery charge of 15 (UK Mainland)

Delivery approx 7 - 14 days depending on where you are located

Back to Glazing Bars | Glazing Bar Prices | Main Page | Contact Us | About Us

E&OE

These web pages and the information and images within them are copyright of The B.B. Group of Companies

Our recommended home improvement websites are listed below:

Plastic Sheet, Mirrors & Canopies
Easy Fit DIY Conservatories
Easyframe DIY Conservatories
Houseproud uPVC Self-build Conservatories
Protech Windows & Doors
Secondary Double Glazing
Garden Buildings, Glazing & Security



For terms and conditions, click here