For use with Multiwall Polycarbonate
Plastic Sheeting
in Pitched Roofglazing Applications
For installing multiwall polycarbonate sheet
thicknesses from 4mm to 20mm.
Please note, the 280 system will also accommodate solid polycarbonate sheet and
glass.
Base Bar Ref 283 with 280G Gasket fitted. Spans up to 3.5m unsupported. Screw-on Cap Bar Ref 280 with
280G Gasket fitted. Cap should be fixed down with screws no more than
380mm apart. Screw-on Polycarbonate Stop End
Plate Ref 280EP for a neat finish. Side Trim Ref 272 for use with 10mm
glazing sheet - also available for 16mm and 20mm sheet thicknesses. Anti-Dust Tape Ref 4840. Use at
eaves (gutter) ends of multiwall sheet to help prevent dust entry,
whilst allowing condensation drainage. 25mm wide for sheet 4mm-8mm
thick; 38mm wide for sheet 10mm-20mm thick.
Sealing Tape Ref 4810. Permanently closes ridge (top) ends of multiwall
sheet. Should be used in combination with 4840 Tape above. Widths as
above. Aluminium 'U' Profile Ref 252.
Covers and protects Anti-Dust Tape, whilst giving a rigid and neat
finish to the cut sheet edge. Installation of an eaves filler
helps to prevent draughts. The illustration shows a timber filler,
however we do supply a dedicated Aluminium Eaves Filler, Ref 285. Butyl Flashing, Ref 200/10, ensures
a weatherproof seal at the ridge.
There is a easyfix glazing bar or panel system suitable for most pitched roof
glazing applications. These include commercial and industrial rooflights, school
walkways and covers, hospital corridors, station canopies, supermarket
entrances, conservatories and lean-to sunrooms. In addition, there is a
cross-section of fixing accessories and complementary items to give a totally
professional finish to your glazing. Whilst these systems are designed primarily
for the easy installation of multiwall polycarbonate sheet glazing, many of them
will also accommodate glass.
When installing multiwall sheet, we advise that you
refer to the manufacturer's literature in relation to: the ratio between sheet
thickness and width; the distances for glazing bar centres; sheet expansion
allowances. To avoid stress in the glazing sheet, you should not overtighten the
screw-on bars and accessories.
We also recommend the use of screws
and bolts, as other metals may fail through natural chemical reaction with
aluminium. Such screws are available in the easyfix range. They come complete
with matching coloured snap-on plastic caps.
All aluminium bars and extrusions are manufactured
to BS1474: 1987 and BS6063. All coloured bars are polyester powder-coated for a
maintenance-free long life.
THESE PRICES ARE CURRENTLY UNDER REVIEW
3 metres
Less
50%
4 metres
Less
50%
6 metres
Less
50%
280
Glazing Bar
Bars available in brown or white
(All Prices are plus VAT)
3 metres
Less
50%
4 metres
Less
50%
6 metres
Less
50%
222 F Profile - 10mm Twinwall
£
£
£
223 F Profile - 16mm Triplewall
£
£
£
F
Profile for 25mm Fivewall Polycarbonate
(All Prices are
plus VAT)
Screw and Cap Set
each
244/245 Fixing Buttons
each
4844 Breather Tape
£
per 33 metres
(All Prices are
plus VAT)
2.1 metres
Less
50%
3 metres
234/235 Polycarbonate U Profile
£
N/A
252 Aluminium U Profile
N/A
N/A
253 Aluminium U Profile
N/A
N/A
Aluminium U Profile for 25mm Fivewall
Polycarbonate
N/A
N/A
All Prices are plus VAT
The prices in
green text are the prices you pay
£25 Delivery Charge for all orders (UK Mainland),
please enquire for offshore and highlands
On all orders there is a delivery charge of £15
(UK Mainland)
Delivery
approx 7 - 14 days depending on where you
are located
Base Bar Ref 283 with 280G Gasket fitted. Spans up to 3.5m unsupported.
Screw-on Cap Bar Ref 280 with
280G Gasket fitted. Cap should be fixed down with screws no more than
380mm apart.
Screw-on Polycarbonate Stop End
Plate Ref 280EP for a neat finish.
Side Trim Ref 272 for use with 10mm
glazing sheet - also available for 16mm and 20mm sheet thicknesses.
Anti-Dust Tape Ref 4840. Use at
eaves (gutter) ends of multiwall sheet to help prevent dust entry,
whilst allowing condensation drainage. 25mm wide for sheet 4mm-8mm
thick; 38mm wide for sheet 10mm-20mm thick.
Sealing Tape Ref 4810. Permanently closes ridge (top) ends of multiwall
sheet. Should be used in combination with 4840 Tape above. Widths as
above.
Aluminium 'U' Profile Ref 252.
Covers and protects Anti-Dust Tape, whilst giving a rigid and neat
finish to the cut sheet edge.
Installation of an eaves filler
helps to prevent draughts. The illustration shows a timber filler,
however we do supply a dedicated Aluminium Eaves Filler, Ref 285.
Butyl Flashing, Ref 200/10, ensures
a weatherproof seal at the ridge.