DIY Plastics UK
by Protech Direct

Easy Fit Products > Glazing Bar Systems > 226/227 Aluminium Glazing Bar System

226/227 Aluminium Glazing Bar System

For use with Twinwall and triplewall Polycarbonate Sheeting
in Pitched Roofglazing Applications

For installing twinwall and triplewall polycarbonate sheet thicknesses from 4mm to 20mm.

Base Bar Ref 227 with 226G Gasket fitted. Spans up to 1.75m unsupported.
Screw-on Aluminium Cap Ref 226 with 226G Gasket fitted. Cap should be fixed down with screws no more than 400mm apart.
Push-fit Polycarbonate Stop End Plate Ref 226EP for a neat finish.
Side Trim Ref 272 for use with 10mm glazing sheet - also available for 16mm and 20mm sheet thicknesses.
Anti-Dust Tape Ref 4840. Use at eaves (gutter) ends of multiwall sheet to help prevent dust entry, whilst allowing condensation drainage. 25mm wide for sheet 4mm-8mm thick; 38mm wide for sheet 10mm-20mm thick.
Sealing Tape Ref 4810. Permanently closes ridge (top) ends of multiwall sheet. Should be used in combination with 4840 Tape above. Widths as above.
Aluminium 'U' Profile Ref 252. Covers and protects Anti-Dust Tape, whilst giving a rigid and neat finish to the cut sheet edge.
Butyl Flashing, Ref 200/10, ensures a weatherproof seal at the ridge.

There is a Easy Fit glazing bar or panel system suitable for most pitched roof glazing applications. These include commercial and industrial rooflights, school walkways and covers, hospital corridors, station canopies, supermarket entrances, conservatories and lean-to sunrooms. In addition, there is a cross-section of fixing accessories and complementary items to give a totally professional finish to your glazing. Whilst these systems are designed primarily for the easy installation of multiwall polycarbonate sheet glazing, many of them will also accommodate glass.

When installing polycarbonate roofing sheets, we advise that you refer to the manufacturer's literature in relation to: the ratio between sheet thickness and width; the distances for glazing bar centres; sheet expansion allowances. To avoid stress in the glazing sheet, you should not overtighten the screw-on bars and accessories.

We also recommend the use of screws and bolts, as other metals may fail through natural chemical reaction with aluminium. Such screws are available in the Easy Fit range. They come complete with matching coloured snap-on plastic caps.

All aluminium bars and extrusions are manufactured to BS1474: 1987 and BS6063. All coloured bars are polyester powder-coated for a maintenance-free long life.



THESE PRICES ARE CURRENTLY UNDER REVIEW

3 metres

Less 50%

4 metres

Less 50%

6 metres

Less 50%

226/227 Top and Bottom Bar Set

Bars available in brown or white 

   
       

(All Prices are plus VAT)

3 metres

Less 50%

4 metres

Less 50%

6 metres

Less 50%

222 F Profile - 10mm Twinwall

223 F Profile - 16mm Triplewall

F Profile for 25mm Fivewall Polycarbonate    

(All Prices are plus VAT)

Screw and Cap Set

each

244/245 Fixing Buttons

each

4844 Breather Tape

    per 33 metres

       

(All Prices are plus VAT)

2.1 metres

Less 50%

3 metres

234/235 Polycarbonate U Profile

N/A

252 Aluminium U Profile

N/A

N/A

253 Aluminium U Profile

N/A

N/A

Aluminium U Profile for 25mm Fivewall Polycarbonate

N/A

N/A

All Prices are plus VAT

The prices in green text are the prices you pay

25 Delivery Charge for all orders (UK Mainland), please enquire for offshore and highlands

On all orders there is a delivery charge of 15 (UK Mainland)

Delivery approx 7 - 14 days depending on where you are located

Back to Glazing Bars | Glazing Bar Prices | Main Page | Contact Us | About Us

E&OE

These web pages and the information and images within them are copyright of The B.B. Group of Companies

Our recommended home improvement websites are listed below:

Plastic Sheet, Mirrors & Canopies
Easy Fit DIY Conservatories
Easyframe DIY Conservatories
Houseproud uPVC Self-build Conservatories
Protech Windows & Doors
Secondary Double Glazing
Garden Buildings, Glazing & Security



For terms and conditions, click here